Chapter 7 ___________________________________________________ Retrieving Data Messages
VAISALA_______________________________________________________________________ 93
Example of the response (the parameter set is configurable):
0R3,Rc=0.0M,Rd=0s,Ri=0.0M,Hc=0.0M,Hd=0s,Hi=0.0M,Rp=0.0M,
Hp=0.0M<cr><lf>
For information on changing the parameters or the units in the response
message, see
Precipitation Sensor on page 138
Supervisor Data Message (aR5)
This command requests a supervisor data message containing self-
check parameters of the heating system and power supply voltage.
Command format:
aR5<cr><lf
>
where
a
=
Device address
R3
=
Precipitation message query command
Rc
=
Rain accumulation (M = mm)
Rd
=
Rain duration (s = s)
Ri
=
Rain intensity (M = mm/h)
Hc
=
Hail accumulation (M = hits/cm
2
)
Hd
=
Hail duration (s = s)
Hi
=
Hail intensity (M = hits/cm
2
h)
Rp
=
Rain peak intensity (M = mm/h)
Hp
=
Hail peak intensity (M = hits/cm
2
h)
<cr><lf>
=
Response terminator
where
a
=
Device address
R5
=
Supervisor message query command
<cr><lf>
=
Command terminator
