Chapter 4 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 47
Mounting on Horizontal Cross Arm
When using the optional mounting kit, alignment is needed only when
mounting for the first time.
To mount a transmitter on a horizontal cross arm:
1.
Remove the screw cover.
2.
Align the horizontal cross arm in south-north direction. See
If you cannot align the cross arm, adjust the wind direction offset
as instructed in
Wind Direction Offset on page 51
.
3.
Mount the transmitter on the cross arm using a mounting bolt
(M6 DIN933) and a nut (M6 DIN934).
1509-067
Figure 23
Mounting Transmitter to Cross Arm (L-Profile)
1
=
Nut (M6 DIN934)
2
=
Mounting bolt (M6 DIN933)
3
=
Screw cover
