Vaisala Veriteq viewLinc 3.6, Administrator'S Manual

Page: 66 / 122

Chapter 4: System Settings
56
©
2011 Vaisala Canada Inc
2
In the Add Logger screen, select 300 Series Transmitter
from the Device Class dropdown list.
3
Enter the following:
a
Disconnect After Scan: To maintain a persistent con-
nection to the device, choose False.
b
Connection Type: If the transmitter has a LAN or
WLAN module, select Network. If you use an external
Digi device, choose COM Port.
c
TCP Port: Default is 23 (can’t be changed)
d
IP Address: See your administrator or check the log-
ger box.
e
Sample Rate: Choose 90 (recommended, but you can
modify the rate if you need more or less recorded da-
ta).
f
Connection Timeout: To ensure continuous monitor-
ing, do not change. Contact your network administra-
tor if required.
4
To add several 300 Series Transmitters or a combination
of Vaisala Veriteq loggers and 300 Series Transmitter
loggers, select Upload Definitions File then enter or
browse to the correct file. To create a Definitions File, see
see page 95.
Swapping Loggers
If you need to send a logger for maintenance (such as
recalibration), you will need to swap it for another logger to
ensure continuous monitoring and alarming.
Note:
If a logger is removed without being swapped,
this will trigger a communication alarm.
When a logger is swapped, the change is noted on the
channel history report (the report shows logger serial number
for a reporting period). If, during the reporting period, the
logger was swapped, this event is listed in the report
summary). The new logger inherits the logger ID, logger and
channel descriptions (Vaisala Veriteq loggers only), alarm
settings and transfer schedule.