Vaisala Veriteq viewLinc 3.6, Administrator'S Manual

Page: 56 / 122

Chapter 3: Alarms
46
©
2011 Vaisala Canada Inc
3
To set a Logger communication alarm, on the Logger
menu select
Logger Alarm Settings
, then
Logger
Communication Alarm Settings
.
The Communications Alarm Settings screen appears.
4
Select
Enable Alarm
(an alarm is not ‘live’ until it is
enabled).
5
To set a communication alarm using an existing alarm
template, select
Use Alarm Template
, then select the
template from the drop-down list.
6
To set custom alarm settings, select
Use Custom Alarm
Settings
.
7
Set your alarm settings on the General Parameters,
Notifications, and Comments tabs following steps 3 to 8
in “Creating Alarm Templates” on page 36.
Editing Communication Alarms
By default, there is one communication alarm preconfigured
for each host and logger. These alarms cannot be deleted;
however, they can be edited.