Vaisala K-PATENTS PR-23 AX Series, Instruction Manual

Page: 156 / 246

146 PR-23 instruction manual
10.1.1 Transmitter program versions
The DTR program version can be updated over the Ethernet connection (see Chap-
ter 12). Contact your nearest representative for more information on how to update
your DTR program version.
Program version 4.07:
The DTR program version 4.07 is compatible with any DTR and any PR-23 sensor
with program version 1.00 or higher. This DTR program version contains following
new features:
– DD-23 Divert Control Unit: protocol versions 2 and 3.
– Network booting for sensors: Network booting of sensors from DTR files.
– mA output: Support for negative span for mA output.
– Temperature bias: Parameter for temperature bias.
– Temperature hold: An ability to hold temperature when concentration is held for
wash or external hold.
– Slew rate limit filter: New output filter method to limit the maximum change
from a measurement to the next.
– Support for advanced http interface
– Instrument tags: An option to add instrument tags (max. 16 characters) to trans-
mitter and sensor information.
– Wash fail status handling: Wash recovery handling changed so that a wash fail-
ure status is not cleared if wash check was not passed. The error status will be
cleared when the wash check is passed.
Program version 3.0:
The DTR program version 3.0 is compatible with any DTR and any PR-23 sensor with
program version 1.00 or higher. This DTR program version contains following new
features:
– Single sensor mode for the intrinsically safe PR-23-...-IA refractometer system
(see Section 9.11). This mode combined with a special single connection H1 inter-
face card PR-10705 creates an Indicating transmitter STR.
– Divert functionality enables the DTR to function as a part of a Divert Control Sys-
tem used to control black liquor concentration in paper and pulp applications. Di-
vert mode only allows for one sensor per transmitter, but a standard DTR is used.
Program version 2.0:
The DTR program version 2.0 is compatible with any DTR and any PR-23 sensor with
program version 1.00 or higher. This DTR program version contains following new
features:
– Instrument homepage and printable verification certificate
– Multi-lingual user interface
– Linear damping
– Field sample soft key