1. De-energize the cabinet:
a. Switch off mains power.
b. Switch off the circuit breaker located inside the cabinet.
1
Circuit breaker
2. Remove the cable duct cover below the PDT101 mounting location.
3. Remove the long vertical cable duct cover in the middle of the cabinet.
4. Mount the new PDT101 transmitters on the DIN rail, preferably at the left end of the rail.
Rest the upper part of the PDT101 locking mechanism on the DIN rail and push down
firmly. This will click the device into place.
5. Assemble the data logger holder.
a. Place the data logger in the logger holder.
b. Fit the cover into place.
c. Tighten the screw by hand.
Chapter 6 – Adding devices to CAB100B
43
Summary of Contents for CAB100
Page 1: ...M212242EN B Installation Guide CMS Industrial Cabinet CAB100...
Page 144: ......
Page 146: ...www vaisala com...
