8. Disconnect the logger data cable from the data logger.
Use a small flat head screwdriver to loosen the screw attached to the connector, then
pull out the connector.
9. Assemble the data logger holder of the replacement data logger.
a. Place the data logger in the logger holder.
b. Fit the cover into place.
c. Tighten the screw by hand.
10. Connect the logger data cable to the RS-232 serial port in the replacement data logger.
Use a small flat head screwdriver to tighten the screw attached to the connector.
11. Mount the new data logger on the DIN rail.
Rest the logger holder locking mechanism on the DIN rail and push down firmly. This
will click the device into place.
CAB100 Installation Guide
M212242EN-B
104
Summary of Contents for CAB100
Page 1: ...M212242EN B Installation Guide CMS Industrial Cabinet CAB100...
Page 144: ......
Page 146: ...www vaisala com...
