11
Installation instructions VRC 430f 0020042470_01
Code layer
enable
15
Code number
0 0 0 0
> Enter code
Fig. 6.3 Screen 15
The default code is 1 0 0 0.
You can change the code on screen C24.
After entering the correct code you automatically reach
screen C1.
6.3
Restoring the parameters to the default
settings
The default settings for the VRC 430f can be restored
as follows:
Press both dials simultaneously for 10 seconds.
This takes you to the default settings screen.
Th. 12.01.06
11:46
3.0 °C
Outdoor
Default setting
Cancel
No
Timer programme
No
Everything
No
Fig. 6.4
Default settings
screen
Menu point
Input
Result
Cancel
Yes
The set parameters remain effective
Time pro-
gramme
Yes
All programmed time windows are de-
leted
Everything
Yes
All parameters are restored back to the
default settings
Table 6.1 Menu selection, Default settings screen
Once the input is confirmed the display reverts to the
basic display or default display.
Initial commissioning 6
Summary of Contents for VRC 430f
Page 2: ......
Page 40: ...0020042470_01 GB 092008 ...