7
Installation instructions VRC 430f 0020042470_01
1
2
Fig. 4.3 Installing the wall mount
Drill two holes with diameter 6 mm to match the fix-
ing holes.
Insert the plugs supplied.
Mount the wall bracket using the two screws (
1
,
2
)
(see Fig. 4.3).
1
2
Fig. 4.4 Sterting up the outside wireless sensor
Key
1 LED
2 Buttons
Activate the radio outdoor sensor by pressing the
red<> button on the reverse side on the right (
2
), e.
g. using a pen. The green LED (
1
) flashes for approx.
30 seconds.
h
Note!
The radio outdoor sensor must always be oper-
ated in conjunction with the heating unit, oth-
erwise no information (e.g. outside tempera-
ture) will be transmitted to the radio receiver.
Fig. 4.5 Securing the radio outdoor sensor
Press the radio outdoor sensor onto the wall brack-
et until it snaps into place.
4.6 Wall-mounting
the
controller
During initial start-up in the chosen location, ensure the
signal path is not adversely blocked by electrical devices
or building components. If the signal path is impaired an
alternative installation location must be found.
1
2
3
Fig. 4.6 Installing of the VRC 430f
Key
1 Controller
VRC
430f
2 Wall
plinth
3 Mounting
openings
Assembly 4
Summary of Contents for VRC 430f
Page 2: ......
Page 40: ...0020042470_01 GB 092008 ...