Operating instructions VRC 430f 0020042470_01
16
The end time for window 1 should be set similarly.
The comfort temperature for time window 1 is set as fol-
lows:
Turn the right-hand dial until the cursor is
positioned in front of the input field for the comfort
temperature of time window 1.
Click the right-hand dial.
The field is highlighted.
Select the comfort temperature by turning the
right-hand dial (one step corresponds to a change of
0.5 °C).
Once the desired comfort temperature is displayed,
confirm by clicking the right-hand dial.
h
Note!
The controller helps the operator to programme
the time windows: The times can only be speci-
fied by inputting these in chronological order.
The time period for the next window cannot
overlap the previous one.
The time window must be between 0:00 and
24:00.
An existing time window can be deleted as fol-
lows: specify the same time for the starting
and end times of the window.
Note!
Follow the instructions for heating circuit 1 to
set the timer programme for hot water genera-
tion or circulation pump. A comfort tempera-
ture does not need to be entered for the water
heating and circulation pump.
4.7.2 Programming
holiday
periods
For a longer period of time when you are not at home,
you can define a lower room temperature. This will save
heating energy. The control ensures that the appliance
heats up the living rooms only to this room tempera-
ture.
You can specify a room target temperature of 15 °C if
you wish to go on holiday from 10 - 24 February. The liv-
ing rooms are only heated to 15 °C during this period.
You can also select the frost protection function instead
of a room temperature.
Proceed as follows to programme a holiday period:
Turn the left-hand dial until you reach screen 7
"Holiday programming for whole system".
Holiday programming
for cpl. system
7
Time window 10. 02. 06 – .
.
Room target value:
Frost protection
> Set starting day
Fig. 4.14 Screen 7 (example)
Turn the right-hand dial until the cursor is
positioned in front of the start date.
The field shows the text "Set starting day".
Click the right-hand dial.
The field is highlighted.
Turn the right-hand dial until the desired start day is
displayed.
Click the right-hand dial.
The date is set. The display changes from highlighted to
normal.
Set the month and year of the start date in the
same way.
In the display field for commet the text "Set starting
month" or "Set starting year" appears.
Set the end date of the holiday period in the same
way.
Enter the room temperature as follows:
Turn the right-hand dial until the cursor is
positioned in front of the room target temperature
input field.
The comment "Select room temperature" appears.
Click the right-hand dial.
The field is highlighted.
Turn the right-hand dial to set the room tempera-
ture (values from 5 °C to 30 °C in half degree steps
and frost protection function are possible).
Click the right-hand dial.
4 Operation
Summary of Contents for VRC 430f
Page 2: ......
Page 40: ...0020042470_01 GB 092008 ...