Multi Split Type Installation Manual
25
EN
13.3 Electric Connection of the Indoor Unit
Warning!
Danger of breakdowns or malfunction. If the fuse
on the PC board is blown please change it
with type T. 3,15A/250V.
• Disassemble the outdoor body of the indoor unit by
pulling it upwards.
• Remove the wiring cover on the right of the body by
unscrewing it (see Figure 13.1).
Fig. 13.1 Wiring Cover.
• Insert the cable from the outside:
• Using the same hole through which the coolant
pipes are installed (or are going to be installed later)
or,
• Using another of the pipe installation windows
provided on the body.
• Pull the electrical cable from the rear of the indoor
unit through the specific hole in the front.
• Connect the line on the terminal strip of the indoor
unit according to the corresponding wiring diagram
(see Figures).
Electric Wiring 13
Summary of Contents for VA 6-050 MXNHDI
Page 40: ...Notes Multi Split Type Installation Manual 39...
Page 41: ......
