16
Split Type User Manual
Fresh Air function (optional):
- The outdoor air can enter indoors through the fresh
air tube, keeping the indoor air fresh.
- To change from health function to fresh air function,
press the FRESH button (fresh air indicator will appear
on the display).
- To cancel the health function press the FRESH button
again.
Note!
The HEALTH indicator will light when the indoor
unit fan does not function even if the anion
generator is not operating.
7.7.2 Health Airflow Operation (HEALTH FLOW)
The direction of the ionised airflow can be set in vertical
and horizontal directions.
Fig. 7.19 HEALTH FLOW function selection.
Legend
1 HEALTH FLOW button
In order to activate:
• Press the HEALTH FLOW button to direct horizontally.
The horizontal flow indicator will appear on the
display.
The unit's bottom inlet and outlet grates will close and
the airflow will circulate horizontally from the top inlet
and outlet grates.
• Press the HEALTH FLOW button again to direct
vertically.
The vertical flow indicator will appear on the display.
The unit's top inlet and outlet grates will close and the
airflow will circulate vertically from the bottom inlet
and outlet grates.
• Press the HEALTH FLOW button again to cancel the
health airflow function.
Both the inlet and outlet grates will remain open
operating in the mode in which the unit was
configured before activating the health airflow
function.
Note!
After configuring the health airflow function, the
inlet and outlet grates will be fixed.
Select the adequate fan direction according to
the real conditions.
Note!
In cooling and dehumidifying mode, prolonged
use of the unit under conditions of considerable
air humidity can cause drops of water to fall on
the outlet grate.
Note!
In HEAT mode it is better to select the vertical
flow direction
In COOL mode it is better to select the horizontal
flow direction.
7 Operating Instructions
Summary of Contents for climaVAIR V 7-025 NW
Page 26: ......
