Vaillant climaVAIR V 7-025 NW, User Manual

Page: 10 / 26

9
Split Type User Manual
EN
7.3 Advice on how to use the Remote Controller
Follow the recommendations below as to how to use the
remote controller:
- When in use, direct the head of the signal transmitter
directly to the indoor unit receiver.
- Keep the distance between the transmitter and the
receiver within 7 m.
- Avoid obstacles between the transmitter and the
receiver.
- Reduce the distance between the remote controller
and the indoor unit in locations with fluorescent lights
with electronic switching on or cordless telephones.
- Do not drop, throw or strike the remote controller.
7.3.1 Remote Controller Lock
In order to lock the buttons and display of the remote
controller device:
• Press the LOCK button.
The rest of the buttons are deactivated.
The lock status indicator appears.
In order to deactivate the lock:
• Press the LOCK button again.
The rest of the buttons are activated.
The lock status indicator disappears.
Note!
If the remote controller does not operate
correctly, press the RESET button with a sharp
object to reset the remote controller.
7.4 Connection/Disconnection of the Unit
In order to connect the unit:
• Press the ON button on the indoor unit or on the
remote controller; the unit will start to operate.
The liquid crystal display (LCD) will show the latest
operating status of the unit (except the HEALTH,
SLEEP, POWER/SOFT and TIMER ON/OFF functions).
In order to disconnect the unit:
• Press the OFF button on the indoor unit or on the
remote controller; the unit will stop:
7.5 Selection of the Operation Mode
7.5.1 Automatic Mode (AUTO)
In automatic mode (AUTO) the air conditioning unit
automatically selects the cooling (COOL) or heating
(HEAT) mode in accordance with the actual ambient
temperature.
Fig. 7.3 Automatic mode selection.
Legend
1 MODE button
2 AUTO mode indicator
3 TEMP button (increase/decrease)
In order to activate:
With the unit connected (see section 7.4):
• Press the MODE button.
The different operation modes are displayed.
AUTO COOL DRY FAN HEAT
Fig. 7.4 Operation modes.
• Select the automatic operation mode (AUTO).
• Press the TEMP buttons to select the temperature
setting.
When pressing the TEMP buttons, the temperature
configuration will increase or decrease by 1ºC.
When keeping the TEMP buttons pressed, the
temperature configuration will increase or decrease
quickly.
Operating Instructions 7