camera preset
Moves the camera to the specified preset, or stores the current camera position and optionally CCU
information, either with or without specifying that Tri-Synchronous Motion is to be used when moving to this
position.
Note
This command corresponds to the CAM_Memory commands in the RS-232 command set.
Synopsis
camera preset { recall | store} <1 – 16> [tri-sync <1 – 24>] [save-ccu]
Options
recall
<1 – 16>
Moves the camera to the specified preset,
using Tri-Synchronous Motion if this was saved
with the preset. If CCU information was saved
with the preset, the camera switches to the
CCU setting associated with the preset.
store
<1 – 16>
Stores the current camera position as the
specified preset.
tri-sync
<1 – 24>
Optional: Specifies that the camera uses Tri-
Synchronous Motion to move to this position,
using the specified speed.
save-ccu
Optional: Saves the current CCU settings as
part of the preset. If not specified, the last color
settings are used when recalled.
Examples
>
camera preset recall 3
OK
>
Moves the camera to preset 3.
>
camera preset store 1
OK
>
Saves the camera's current position as preset 1.
>
camera preset store 4 tri-sync 15
OK
>
Stores the camera's current position as preset 4. The camera will use Tri-
Synchronous Motion at speed 15 when it is recalled to this preset.
>camera preset store 2 save-ccu
OK
>
Stores the camera's current position as preset 2. The camera applies the current
CCU settings when it is recalled to this preset.
70
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
