camera tilt
Moves the camera vertically.
Synopsis
camera tilt{ up [<speed>] | down [<speed>] | stop | get | set}
Options
up
Moves the camera up.
down
Moves the camera down.
speed
<1 – 20>
Optional: Specifies the tilt speed as an integer
(1 to 20). Default speed is 10.
stop
Stops the camera's vertical movement.
get
Returns the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 (down) and 90.00 (up).
Note that the range is roughly 30.00 to -90.00 if
Image Flip is selected.
set
<position>
Sets the camera's absolute tilt position in
degrees, as a floating point value between
approximately -30.00 and 90.00 (-90 to 30 if the
camera is configured for inverted operation).
This is the minimum range; individual cameras
may have an additional degree or two of travel
before they reach their physical limits. If the
value is out of range, the camera returns an
error message and no motion occurs.
Examples
>
camera tilt up
OK
>
Tilts the camera up at the default speed.
>
camera tilt down 20
OK
>
Tilts the camera down using a speed of 20.
>
camera tilt stop
OK
>
Stops the camera's vertical motion.
67
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
