Basic Connections – RoboSHOT HDBT Camera with Third-Party Control and Power
This example shows basic connections using a Crestron device. This diagram shows a RoboSHOT 12
HDBT camera. The RoboSHOT 12E HDBT, RoboSHOT 30 HDBT, and RoboSHOT 30E HDBT can be
connected in the same way. Connection details vary depending on the equipment and functionality to be
used in your installation.
Options for Power and Other Connections – RoboSHOT 12 HDBT and
RoboSHOT 30 HDBT
Use the provided 12 VDC power supply –
Network and video output require separate connections.
Connect the camera to a OneLINK
®
device –
A single Cat-5e (or better) cable to the
OneLINK/HDBaseT connector provides power, control, network, and video connectivity. Network, video
output, and RS-232 control are connected at the OneLINK receiver. Do not use the camera's 12 VDC
power supply in this configuration.
Use a PoE+ power injector –
Connect to the network through a PoE+ power injector. Video output
requires a separate connection. In most cases, you do not need to use the camera's 12 VDC power supply
in this configuration.
20
Complete Manual for RoboSHOT HDBT High-Performance PTZ Cameras
