OneLINK Bridge for Cisco Cameras with Cisco Codecs, 999-9660-000/001/009
Camera and codec not included.
Note
If connecting to a Cisco SX20 codec, you will need to provide
a Cisco split cable, Cisco part number CAB-PHD4XS2-
SPLIT. This cable is also required when connecting to a Cisco
Precision 40 or Precision HD 1080p2.5x camera; you will need
two of them if connecting one of these cameras and an SX20
codec.
n
OneLINK Bridge AV Interface
n
OneLINK EZCamera Interface Module (EZIM) with
mounting screws
n
Power supply, 48 VDC/1.36 A, with AC cord set(s)
n
Wall mount with mounting hardware for Cisco codec and
camera
n
USB 3.0 A to B cable, 6 ft. (1.8 m)
n
3-position Phoenix connector plug, 3.5 mm, qty. 4
n
Power cable EIAJ-04 to 5.5x2.1 mm, 1 ft. (0.3 m)
n
HDMI cable, 1 ft. (0.3 m)
n
HDMI cable, 3 ft. (0.9 m)
n
Custom-pinout Cat-5e cable for Cisco cameras, 1 ft. (0.3 m)
n
Custom-pinout Cat-5e cable for Cisco SX20, 3 ft. (0.9 m)
n
Cat-5e patch cable, 1 ft. (0.3 m)
n
Cat-5e patch cable, 3 ft. (0.9 m)
n
EZCamera RS-232 control adapter 998-1002-232
n
Quick-Start Guide 411-0009-02
OneLINK Bridge for RoboSHOT HDMI with Cisco Codecs, 999-9670-000
Camera and codec not included.
Note
If connecting to a Cisco SX20 codec, you will need to provide
a Cisco split cable, Cisco part number CAB-PHD4XS2-
SPLIT.
n
OneLINK Bridge AV Interface
n
OneLINK EZCamera Interface Module (EZIM) with
mounting screws
n
Power supply, 48 VDC/1.36 A, with AC cord set(s)
n
USB 3.0 A to B cable, 6 ft. (1.8 m)
n
3-position Phoenix connector plug, 3.5 mm, qty. 4
n
Power cable EIAJ-04 to EIAJ-04, 1 ft. (0.3 m)
n
HDMI cable, 1 ft. (0.3 m)
n
HDMI cable, 3 ft (0.9 m)
n
Custom-pinout Cat-5e cable for Cisco, 3 ft. (0.9 m)
n
Cat-5e patch cable, 1 ft. (0.3 m), qty. 2
n
Cat-5e patch cable, 3 ft. (0.9 m)
n
EZCamera RS-232 control adapter 998-1002-232
n
Quick-Start Guide
6
Installation Guide for the OneLINK Bridge AV Interface
