Connecting a RoboSHOT HDMI Camera
999-9690-000/001/009
In this diagram, the OneLINK Bridge extends network connectivity, power, and control to a RoboSHOT
HDMI camera, and brings camera video to the connected HDMI display. The OneLINK Bridge also
provides audio connections, and can originate a USB stream to bridge non-USB equipment into a USB-
based conferencing application.
Items in this diagram:
n
OneLINK Bridge AV interface and OneLINK EZIM
n
OneLINK power supply and AC cord set
n
RoboSHOT 12 HDMI camera (not included)
n
Power cable, HDMI cable, and Cat-5e cables from the OneLINK EZIM to the camera
n
HDMI display and HDMI cable (not included)
n
Laptop with soft conferencing client (not included)
n
Cat-5e cables for OneLINK and network connections (not included)
Camera Configuration
Set HDMI output resolution using the rotary switch on the back of the camera. No additional configuration
is required; if desired, additional configuration is available via the camera's web interface. Point the remote
at the camera and press the Data Screen button to see the camera's IP address on the connected HDMI
display.
23
Installation Guide for the OneLINK Bridge AV Interface
