vacuubrand ME 16C NT-ME 16C NT+EK, Instructions For Use Manual

Page: 15 / 88

page 15 of 88
• This product may only be used indoors in a non-explo-
sive atmosphere, and in a dry environment.
Adopt suitable measures in case of differences from
recommended conditions, e.g., installation in higher
altitudes (risk of insufficient cooling), conductive pollu -
tion or external condensation on the pump.
• Do not operate this product near flames.
To the best of our knowledge the equipment is in com-
pliance with the requirements of the applicable EC-direc-
tives and harmonized standards (see ”Declaration of Con-
formity”) with regard to design, type and model. Directive
EN 61010-1 gives in detail the conditions under which the
equipment can be operated safely (see also IP degree of
protection, “Technical data”, pg. 24).
Operating conditions
➨
These pumps are not approved for operation in po-
tentially explosive atmospheres. Do not operate the
pumps in potentially explosive atmospheres.
➨
Pumps
without the
”
`
”
mark on the rating plate
are
not approved for the pumping of potentially explo-
sive atmospheres . Do not pump potentially explo-
sive atmospheres with those pumps.
➨
Pumps bearing the
”
`
”
mark on their rating plates
are
approved for the pumping of potentially explo-
sive atmospheres according to their ATEX classifica -
tion imprinted on their rating plate, but they are not
approved for operation in potentially explosive at-
mospheres (see section “
`
Important information:
Equipment marking (ATEX)”, pg. 22)
.
➨
The pumps are not suitable to pump any of the sub-
stances listed below.
NOTICE