Installation
vacon •
13
24-hour s358 (0)40 837 1150 • Email: [email protected]
1
3.3.2.
Configure Option board parameters
These features are available from NCIPConfig tool version 1.6.
In the tree-view, expand the folders until you reach the board parameters. Slowly double-click the
parameter (
Comm. Time-out
in figure below) and enter new value. New parameter values are auto-
matically sent to the option board after the modification is complete.
NOTE! If the fieldbus cable is broken at the Ethernet board end or removed, a fieldbus error is im-
mediately generated.
Summary of Contents for NX OPTCP
Page 1: ...vacon nx ac drives optcp profinet option board user manual ...
Page 43: ......
Page 44: ...Document ID Rev A ...