8
vacon • 63
Options
8.4.4
Parameters
Through this submenu, you can reach the application parameter groups and parameters. More in-
formation on parameters in the VACON
®
20 X Application Manual.
8.4.5
Faults
Under this menu, you can find
Active faults
,
Reset faults
,
Fault history
,
Counters
and
Software in-
fo.
Active faults
Fault history
Menu
Function
Note
Active faults
When a fault/faults appear(s), the
display with the name of the fault
starts to blink. Press OK to return
to the Diagnostics menu. The
Active faults
submenu shows the
number of faults. Select the fault
and push OK to see the fault-time
data.
The fault remains active until it is
cleared with the RESET button or
with a reset signal from the I/O ter-
minal or fieldbus or by choosing
Re-
set faults
(see below).
The memory of active faults can
store the maximum of 10 faults in
the order of appearance.
Menu
Function
Note
Fault history
10 latest faults are stored in the
Fault history.
Entering the Fault history and click-
ing OK on the selected fault shows
the fault time data (details).
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
