Control unit
vacon • 36
5
5.3.5
Description of additional echo connectors
In this paragraph you will find the description of the additional echo connector for the I/O ter-
minals.
Figure 23. The I/O remote echo connector mounted on the control board.
In Figure 23 the view of Molex
®
connector for the I/O terminals is shown. In the control unit the
position of this connector is numbered with 11 as shown in Figure 20 and Figure 21. The type
of this connector is Pico-Clasp™ Wire-to Board PCB Header, Dual Row, RIght Angle. The code
by Molex
®
is: 501571-2007.
It mates with Pico-Clasp™ Wire-to Board Receptacle Housing (crimp housing), Dual Row, 20
Circuits. The code by Molex
®
is: 501189-2010. See Figure 24.
Figure 24.Receptacle housing for I/O remote echo connector.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
