background image

-3-

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be
followed, including the following: 

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. 

Failure to follow the warnings and instructions may result in electric shock, fire 

and/or serious injury.

       WARNING - 

To

 

reduce the risk of fire, electric shock, or injury:

•  Do not use outdoors or on wet surfaces.
•  Do not allow to be used as a toy. Close attention is necessary when used by 

or near children, pets or plants.

•  Use only as described in this manual. Use only manufacturer’s recommended 

attachments.

•  Do not charge if charging adapter is damaged. If appliance is not working as 

it should, has been dropped, damaged, left outdoors, or dropped into water, 
return it to a service center.

•  Do not pull or carry the charging adapter by cord, use cord as a handle, 

close a door on cord, or pull cord around sharp edges or corners. Do not run 
appliance over cord. Keep cord away from heated surfaces.

•  Do not unplug by pulling on charging cord. 
•  Do not handle charger, including charger plug, and charger terminals with wet 

hands.

•  Do not put any object into openings. Do not use with any opening blocked; 

keep free of dust, lint, hair, and anything that may reduce air flow.

•  Keep hair, loose clothing, fingers, and all parts of body away from openings 

and moving parts.

•  Use extra care when cleaning on stairs.

•  Do not use to pick up flammable or combustible liquids, such as gasoline, or 

use in areas where they may be present.

•  Do not pick up anything that is burning or smoking, such as cigarettes, 

matches, or hot ashes.

•  Do not use without dust cup or filter in place.

•  Prevent unintentional starting. Ensure the product does not operate before 

connecting to hand vacuum, picking up or carrying the appliance. Carrying the 

appliance with your finger on the switch invites accidents.

Summary of Contents for VSD1801




















Reviews: