Installation site
------------------------------------------------------
D
o not install the device in a narrow and confined space and install it in a
place that can ensure its normal access, to avoid damage to storage goods
by maintenance difficulties and delayed repair in case of device failure.
The installation floor must be solid, flat, non-combustible and able to bear
the weight of the device during operation.
P
rovide good ventilation and avoid direct sunlight.
E
ach device needs a separate power outlet, please ensure that the power
outlet should withstand a current of ≥10 A. The plug and socket are firmly
connected.
C
heck the working voltage before use. In areas with unstable voltage, a
voltage stabilizer suitable for device load should be considered for voltage
stabilization, and the power of the voltage stabilizer should be greater than
4000 W to ensure that the input voltage requirements in the installation
environment can be met.
D
evice shall be reliably grounded. If the power cord socket is equipped
with grounding wire, check whether the grounding is good before use. If the
socket is not grounded, it must be installed by professional engineers and
technicians.
Warning
D
o not ground the refrigerator through gas pipe, water
supply pipe, telephone line or lightning rod, which may
cause electric shock.
After installation, the power plug must be accessible, so
that the power cord can be unplugged in time in case
of emergency. Nothing should cover the vent of the
refrigerator.
Note
As the ambient temperature has a great impact on the
device, if the above environmental requirements cannot
be met, the device may not be able to operate normally.
Please improve the environment before using the device;
the device is an intermittent operation working system.
Ambient storage and transportation temperature:
-40°C~+60°C, relative humidity: 10%~90%.
10