![background image](http://html1.mh-extra.com/html/v-zug/dias-10/dias-10_operating-instructions-manual_3215583008.webp)
2 Appliance description
2.5
Operating and display elements
Switch off / activate/deactivate wipe protection
Power level 1 / activate/deactivate remote control
Power level 2
Power level 3
Intensive level
CleanAir function (air extraction every hour for 10 minutes)
After-running time – delays the switching-off of the appliance by 15
minutes
Illumination ON/OFF and change light intensity (hold depressed for two
seconds)
Infrared port for the remote control
Flashing:
Clean grease filters
Flashing:
Clean activated charcoal filters
Depending on the model and features, the specification of the appliance may differ
from the standard specification described herein.
2.6
Remote control
This appliance can be operated remotely. The remote control is powered by a 3V battery
type CR2032 (not included in scope of delivery).
Do not place the remote control near any heat sources. The batteries must be dis-
posed of properly in accordance with the regulatory requirements.
Operating and display elements
Switch illumination on/off, change
light intensity
Switch appliance on/off
Stepwise decrease power level
Stepwise increase power level
Switch intensive level on / off be-
fore time
Switch after-running time on / off
before time
8
Summary of Contents for DIAS 10
Page 1: ...Operating instructions DIAS 10 Range hood...
Page 21: ...21 10 Notes...
Page 22: ...22...