V-ZUG DIAS 10, Operating Instructions Manual

Page: 11 / 24

3 Operating the appliance
Resetting the filter saturation indicator
ü The grease filters have been cleaned; or
ü The activated charcoal filters have been changed.
▸ With the range hood switched off, hold the button depressed until all the LEDs
flash three times.
– The flashing LEDs (metal grease filters) or (activated charcoal filters) no
longer flash.
3.9 Operation with remote control
Activating/deactivating the remote control
▸ With the appliance switched off, hold the button depressed for five seconds.
– All LEDs flash twice.
– The range hood can now be operated using the remote control.
▸ With the appliance switched off, hold the button depressed for five seconds.
– All LEDs flash once.
– The range hood can only be operated using the operating and display elements.
Switching the appliance on/off
▸ Press the button.
– The appliance switches on at power level .
▸ Press the button again.
– The appliance switches off.
Switching the illumination on/off
▸ Touch the button.
– The illumination switches on at maximum intensity.
▸ Touch the button again.
– The illumination switches off.
Changing the power level
▸ Press the button.
– The next lower power level is activated.
▸ Press the button.
– The next higher power level is activated.
Switching the intensive level on / off before time
▸ Press the button.
– The button illuminates and the button flashes.
– The intensive level switches on.
– The after-running time switches off before time.
▸ Press the or button.
– The button light goes out.
– The intensive level switches off before time.
Switching after-running time on / off before time
In the after-running time, the motor, fan wheel and illumination run for another 15
minutes and then switch off automatically.
▸ Touch the button.
▸ Touch the or button repeatedly until the desired power level is reached.
11