background image

1 Safety precautions

5

The extracted air must not be
fed into a chimney which is
used for exhausting fumes
from appliances burning gas
or other fuels.

The minimum distance
between the supporting sur-
face for the cooking equip-
ment on the hob and the low-
est part of the range hood
must be observed. If the
range hood is installed above
a gas appliance, this distance
must not be less than 65 cm.
If the installation instructions
for the gas hob stipulate a lar-
ger distance, this must be ob-
served.

WARNING: Before replacing
the light bulb, ensure the ap-
pliance is switched off and
disconnected from the mains
power supply to avoid pos-
sible electric shock.

When replacing a light bulb,
the maximum wattage rating
of replaceable light bulbs
must be visible.

This appliance is intended for
use in the home and similar
settings such as: in staff kit-
chens in shops, offices and
other commercial establish-
ments; in agricultural estab-
lishments; by guests in hotels,

motels and other accommod-
ation establishments; in bed
and breakfast establishments.

Do not operate the appliance
using an external time switch
or a separate remote control
system.

Failure to follow the cleaning
instructions may cause a fire
hazard.

Do not flambé food under-
neath the range hood.

1.4 

Instructions for use

Before using for the first time

The appliance must be installed and
connected to the electricity supply in
accordance with the separate installa-
tion instructions. Have a qualified fitter/
electrician carry out the necessary
work.

Observe the official regulations for the
exhaust-air layout.

Dispose of the packaging material in
accordance with local regulations.

Correct use

The appliance is designed for use in
the home for extracting cooking fumes
and smells from above the cooking sur-
face.

Any repairs, modifications or manipula-
tions to the appliance, especially any
electrically live parts, may only be car-
ried out by the manufacturer, its cus-
tomer service department or similarly
qualified persons. Repairs if carried out
incorrectly may cause serious injury,
damage to the appliance and fittings,
as well as affect the functioning of the
appliance. If the appliance is not work-
ing properly or in case a repair is
needed, follow the instructions given in
the 'Service & Support' section. Contact
our Customer Services if necessary.

Summary of Contents for DIAS 10

























Reviews: