![background image](http://html1.mh-extra.com/html/v-zug/dias-10/dias-10_operating-instructions-manual_3215583016.webp)
5 Trouble-shooting
5
Trouble-shooting
5.1
What to do if …
… the illumination is not working
Possible cause
Solution
▪
Fuse or automatic circuit
breaker for electrical installa-
tions in the home is defect-
ive.
▸ Replace the fuse.
▸ Reset the automatic circuit breaker.
▪
An interruption in the power
supply.
▸ Check the power supply.
▪
LED is defective.
▸ Inform Customer Services.
… the appliance is not extracting enough air
Possible cause
Solution
▪
The grease filters are dirty.
▸ Clean the grease filters.
▪
The activated charcoal filters
are saturated.
▸ Replace the activated charcoal filters.
... the range hood or the operating element is not working
Possible cause
Solution
▪
The range hood or the oper-
ating element is not working.
▸ Disconnect the power supply for at least five
seconds.
▸ Switch the range hood back on again.
The fault cannot be remedied.
▪
Contact Customer Services.
… Saturation indicator illuminates
Possible cause
Solution
▪
Metal grease filters are dirty. ▸ Clean metal grease filters.
▸ After cleaning, hold the
button depressed for
at least five seconds.
–
The display goes out.
16
Summary of Contents for DIAS 10
Page 1: ...Operating instructions DIAS 10 Range hood...
Page 21: ...21 10 Notes...
Page 22: ...22...