V-ZUG CombiSteamer V4000 45, Operating Instructions Manual

Page: 18 / 52

4 Operation
Selecting and starting options
▸ Select an application from the desired application group and confirm with «OK», if re-
quired (see page 14).
– The ready to start screen appears in the display.
▸ Touch .
– The options menu appears in the display:
On
Start later
Preheat
This allows you to set the
appliance to start at a later
time. It retains any values you
enter and does not switch to
standby mode.
▸ Touch the desired option.
▸ In the right content pane of the display, either turn on the option with the switch or
touch the value range and set the desired value using the CircleSlider.
– Each defined option is marked with a (dot).
▸ Confirm the setting with «OK».
– Several settings can also be confirmed at once with «OK».
– The ready to start screen appears in the display.
▸ Press «Start» to start the application.
The options «Operating time» and «End» can be set directly in the ready to start
screen.
4.8 Checking and changing the settings
Values and settings can be changed before and during operation. Exceptions are setting
the end time during operation (see page 24) and preheating.
▸ Touch the field for the desired setting.
▸ To adjust or reset a value, touch the value range and adjust the value using the
CircleSlider.
– The colour of the value range changes to amber.
– The value can be reset with .
▸ To turn the option on or off, touch the switch.
▸ Confirm the setting with «OK».
4.9 Setting to start later
With «Start later», an application and its settings can be predefined and set to start at
a later time. The application does not start automatically, but instead only through the in-
teraction of the user. The appliance remains in the start screen and does not switch back
to standby.
Setting «Start later»
▸ Select the desired application (see page 14).
▸ Touch
«Options» and select «Start later».
▸ Touch the «Start later» switch.
18