V-ZUG AdoraWash V2000, Operating Instructions Manual

Page: 34 / 48

11 Trouble-shooting
Problem Possible cause Solution
Water sounds
after programme
has finished when
washing drum is
turned by hand. ▪ The vanes are filled with
water to compensate
the unbalanced load. ▸ The water is automatically pumped
off. No action is necessary.
Traces of condi-
tioner or water in
fabric conditioner
compartment. ▪ Siphon in fabric condi-
tioner compartment is
missing or not inserted
correctly. ▸ Insert the siphon correctly (see page
28).
▪ Siphon or suction tube
is clogged. ▸ Clean siphon and suction tube (see
page 28).
Traces of powder
detergent in deter-
gent compartment. ▪ Damp or lumpy washing
detergent. ▸ Store washing detergent in a dry
place.
▪ Detergent compartment
was damp and a
delayed start was selec-
ted. ▸ Wipe the detergent compartment dry
before adding the detergent.
▪ Water flow pressure is
too low. ▸ Open water tap fully.
▪ Water inlet is scaled up. ▸ Check water inlet and, if necessary,
clean the water inlet
filter (see page 28).
▪ Flap 1 was inserted into
position for liquid deter-
gent.
▸ Pull flap 1 upwards and out and in-
sert into position a for powder deter-
gent.
1
a
Laundry is still dry
after programme
has finished – no
error message. ▪ The demo mode is
switched on. ▸ Switch the demo mode off (see
page 27).
34