V-ZUG AdoraWash V2000, Operating Instructions Manual

Page: 20 / 48

5 Operating the appliance
5.14 Opening the appliance door during washing
The appliance door can be opened when the indicator light for the button is illumin-
ated.
▸ Touch the button.
– The appliance door opens.
– Laundry can be added or removed.
▸ Close the appliance door.
▸ Touch the
button.
– The programme is resumed.
In the event of a power failure, the appliance door can only be opened using the
emergency door release (see page 30). The programme sequence is automatic-
ally resumed following such a power failure.
5.15 End of programme
Unloading the washing before time
Shortly before the end of the programme, the washing is loosened up. This takes about
1–2 minutes.
▸ Touch the button to unload the washing dur-
ing the loosening-up phase.
Door opener
The user settings that are enabled determine whether the appliance door opens automat-
ically when the programme ends (see page 25) and whether information on energy
consumption is displayed or not.
▪ «Automatic door opener On»:
When the programme has finished,
– the appliance door opens automatically.
– the washing can be unloaded.
▪ «Automatic door opener Off»:
When the programme has finished,
– «End of programme» is displayed in the TouchDisplay for about 5 minutes. Then
the display goes dark.
▸ Touch the button to open the appliance door and unload the washing at any time.
Stop after rinsing
The washing remains lying in the water after the final rinse. The water must be drained
off before the washing can be unloaded.
▸ Touch the button 1×.
– The washing is spun at the spin speed set for
the programme.
– The water is pumped off.
20