V-TUF RAPID VSC DEM, Instructions Use And Maintenance

Page: 10 / 50

RAPID-VSC-DEM
Instructions - user maintenance manual
- ©02/20 Rev:1.0 /TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 10
F
IGURE
1 S
ECTION
1.6 - Marking data and machine identification plate
1.7 U
SE AND STORAGE OF THE
M
ANUAL
This manual is intended for the user of the machine, those responsible for moving, installing, using, monitoring and final
dismantling.
The manual serves to indicate the intended use of the machine in accordance with the design assumptions and technical
characteristics; it provides instructions for moving, appropriate and safe installation, assembly, adjustment and use; it
provides information to direct maintenance work, facilitates the ordering of spare parts and provides information about any
residual risks.
In particular, the following information must be constantly available for consultation:
- Conditions of use envisaged for the machine;
- Workstation occupied by the operator;
- Instructions on:
commissioning, operation, transport, installation, assembly and disassembly, adjustment, maintenance and repair
work, any training instructions;
The manual is considered to be an integral part of the machine and must be kept in good condition until it is finally scrapped.
The manual must be stored in a protected, dry place, protected from sunlight and must always be available for consultation
near the machine.
1.8 D
OCUMENTS ACCOMPANYING THIS
M
ANUAL
The machine is supplied complete with:
−
EC' declaration of conformity of the machine;
−
Instruction manual for the installation, use and maintenance of the machine;
−
Engine operation and maintenance manual.
1.9 U
SER INFORMATION
This manual reflects the current state of the art of the machine and cannot be considered to be a guide
inadequate only because it has been updated on the basis of new experience; the manufacturer reserves the right to
update production and manuals, without being obliged to update previous production and manuals.
The characteristics of the materials may be changed at any time, according to technical development, without prior
notice.
The manufacturer is relieved of any responsibility in the event that the machine is used:
•
misuse;