RAPID-VSC-DEM
Instructions - user maintenance manual
-
©02/20 Rev:1.0
/TRANSLATION OF THE ORIGINAL
INSTRUCTIONS
Page 26
CHAPTER 9 - H
ANDLING AND INSTALLATION OF THE MACHINE
9.1 P
RELIMINARY OPERATIONS
The machine was tested in the manufacturer's factory to verify the correct functioning of all components according to the
specifications in force. No preliminary operations are required.
9.2 L
IFTING
If the machine has to be lifted, it must be attached to the lifting equipment by means of straps/chains or suitable equipment
that safeguards its integrity. Ensure that the equipment used has a capacity greater than the weight and volume of the
machine; it is recommended that efficient equipment be used in accordance with the safety operating rules in force and that
staff be trained and informed about the risks of lifting and suspended loads
A
TTENTION
It is absolutely forbidden to stand under or in the immediate vicinity of the machine while it is being lifted
and moved.
Be wary of bent and shrivelled chains or ropes, always use thick work gloves.
Chains or ropes must be firmly attached.
Make sure that the attachment is strong enough to support the intended load....
9.3
HANDLING IN THE WORKPLACE
If the machine is to be moved, it must be secured by means of straps, ropes or other suitable means in a stable and safe
manner to prevent accidental movement from causing damage to persons or property as well as to the machine itself.
9.4 T
RANSPORT
The machine can be moved by means of suitable mobile lifting gear using ropes and/or chains to be tied into the appropriate
"lifting ears" (see chapter 9.2). These operations must be carried out by personnel trained and informed about the risks of
lifting and suspended loads.
9.5 F
REE SPACES OF RESPECT
The machine requires at least 1000 mm (measured with all movable guards in the open position) of free space in relation
to the maximum overall dimensions for correct operation and maintenance without the risk of obstruction by other elements.
A
TTENTION
The floor of the place where the machine is to be installed or operated must be even, well levelled and
suitable for bearing the loads of the machine.
