V-TEK PT-55, User Manual

Page: 66 / 112

56 PT-55 User’s Guide
Configuring & Running a Peel Test D291308.7M.fm
7. In the Main Screen , type in the desired pull length in the Pull Length field. Pull Length should
be set between 0-200 mm.
Note : If the Pull Length is set to 0, the pull test will default to the X Axis Maximum which was
set in the Supervisor Settings screen . If the X Axis Maximum setting is different than the Pull
Length setting, the pull test will stop at whichever length is shortest.
8. Click the Save File button to create a Master Form , if desired.
Note : for more details on creating a Master Form, proceed to the next section in this chapter.
9. Ensure sealed tape sample is loaded properly and carriage is in the Home position.
Figure 3.36