V-TEK PT-55, User Manual

Page: 59 / 112

D291308.7M.fm Supervisor Settings Screen
Chapter 3: Operation 49
File Type
The File Type section is used to determine which file type the Auto Save will be exported as.
There are three options: STD (Standard), MAF (Moving Average File) and CSV (Comma Sepa-
rated Values format). The Standard file type is a simple text file. The * .csv and *.maf file type
can be exported into an Excel spreadsheet for a printed report. See Creating a *.csv Export File
and Creating a *.maf Export File at the end of this chapter for further information.
Filename
The File Name field is a text field which allows the user to enter a unique file name.
Note: If Auto Save Mode or Auto - Sales Order Mode are selected, the date and time in 24
hour format of the save will automatically be appended to the File Name . For example, if the
user enters a file name of “My File” in Auto Save Mode and the file is auto-saved at 4:40.30
PM on October 22, 2014, the File Name will be My File_2014.10.22_16.40.30 . Similarly if
Auto-Sales Order Mode is selected and the file for Sales Order #1234567 is saved at the
same date and time, the File Name will be 1234567_2014.10.22_16.40.30 .
Change Save Location
Clicking the Browse button allows the operator to browse through folders and select an auto
save location.Choose a location and click on OK . The Current Auto Save Location is displayed
below the Browse button.
ADVANCED OPTIONS
If Authorize Failures is checked, anytime a peel test
fails the PT-55 will stop, the buttons in the Main
Screen will become inactive and the Supervisor but-
ton will flash red once the PT-55 is stopped or the test
is complete. Normal operation can only resume after
the S
upervisor Password is entered.
DISPLAY OPTIONS
Display options allows the user to select what test
results will be highlighted in the Main Screen at the
conclusion of a pull test. The options are
Mean Read-
ing, Maximum Reading, Minimum Reading, Current
Reading
and Current Range .