SYSTEM INFORMATION
Press “ ” and “ ” in the main interface to select “System Information”, and then press
“ENT” to view the parameters which is shown in Figure 30.
The system information include “product model”, “serial No.”, “software version” and
“certificate version”. If select "Software Version" in the "System Version", can view the
inverter Version 1, Version2, MCU Software Version, RS485 protocol and other information,
as shown in Figure 31.
FAULTS
Press “ ” and “ ” in the main interface to review the fault history, and then press “ENT”
to view the sub-menu which is shown in Figure 32.
User can press “ ” or “ ” key in the “fault information” interface to view the fault records.
“Fault information” records the latest 8 pieces of fault information of the inverter, as shown
in fig 26. When there is no fault currently, it will display “No fault!”. See history for more
information on fault records or fault time.
INVERTER CONTROL
Press “ ” and “ ” in the control interface, and then press “ENT” to view the sub-menu
which is shown in Figure 33.
System Information
Part No .
Serial No .
Soft Ver
Figure 30 System information
S ys te m Ve r
V er si on 1
: V 1 . 0 5
V er si on 2
: V 1 . 0 5
M CU V er si on
: V 1 . 0 5
F au lt
1 : A 0 05 G ri d un de r fr eq
2 : A 0 01 I np ut u nd er V ol t
3 :
1
C on tr ol M en u
O n /
O ff
Clear
R es ta rt
F ac to ry
Figure 33 Control interface
Figure 32 Fault information
Figure 31 System version
Refer to the table below for detailed information.
