V-TAC VT-66036103, Instruction Manual

Page: 28 / 44

25
5.5.4 System setting
5.5.4.1 System setting
Interface Description
This interface is used to access system information.
Press Up/Down button to move corresponding options.
Press Enter to enter the selected menu.
Press ESC button to return to the setting interface.
There are 7 options in total.
SYS SETTING
1: WORK MODE
2: EPS ENABLE
3: BAT WAKE -UP
4: REMOTE CTRL
5: START DELAY
6: PV INPUT
7: Anti Reverse
5.5.4.1.1 Work mode
Interface Description
This interface is used to select the working mode.
Press ESC button return to setting interface. (Refer to 3.3)
WORK MODE
1:SELFCONSUME
2:PEAK SHIFT
3:BAT PRIORITY
5.5.4.1.2 Peak shift work time
Interface Description
WORK MODE
1:SELFCONSUME
2:PEAK SHIFT
3:BAT PRIORITY
WORKTIME
1:TIME 1
2:TIME 2
3:TIME 3
CHAG START1 00:00
CHARGE END100:02
DISC START1 00:03
DISCHA END1 23:59
This interface is used to select the working mode.
Press ESC button return to setting interface. (Refer to 3.3).
Select the peak clipping and valley filling mode, you also need to
set the charge and discharge time
It’s allowed to set Three charging and discharging periods.
When setting the time, ensure that the time of the inverter is the
local time.
Press Enter to enter the next menu.
This parameter is set for one day. If the specified time conflicts, the
first time is used as the main time perform. If the three time ranges
do not conflict, the three time ranges are executed in sequence.
This interface is used to adjust the time of peak load shifting.
Press Up/Down button to move the corresponding options.
Press Enter to enter the selected menu.
Press Esc button to return to the working mode interface.