V-TAC VT-66036103, Instruction Manual

Page: 13 / 44

10
Position Min.size
Left
300mm
Right
300mm
Top
300mm
Bottom 300mm
Front 300mm
3
.
4
Mounting
Ø
Space Requirement
300mm
300mm
300mm
Table Available Space Size
300mm
Step 1: Screw the wall bracket on the wall
1.1 Place the bracket on the wall and mark down the position of the 4 holes.
1.2 Drill holes with driller, make sure the holes are deep enough (at least 60mm) to support the inverter.
1.3 Install the expansion tubes in the holes, and tighten them. Then install the wall bracket with the
expansion screws.
Step 1
Step 2: Place the inverter on the wall mounted bracket by holding the handle on the side.
Step 2
Step 3: Tighten the
fi
xing screws on both sides of the inverter.
Step 4: If necessary,
customer
can install an anti-theft lock on the left-bottom of the inverter.
Step 3、Step 4