smoke alarm will keep for sound for the user to find the exact location place.
MEMORY:
When the user is not at home, the smoke alarm returns to normal after an alarm occurs. The user
can press the "memory" button of the remote control. At this time, the smoke alarm that once alarm will send
out a loud alarm sound to facilitate the user to find the specific location.
Note:
When you press the "memory" key for the first time, you start to repeat the operation of the key for 10
minutes and help you find out the smoke alarm which once alarmed,but if excess than 10min after your
first press, this function is invalid.
Remote control low voltage -
When it is found that the red indicator light of the remote control flashes once
every 10 seconds, it means that the remote control is about to run out of power. Please replace the battery in
time.
V.
Notice
After you test the smoke alarm, the smoke alarm will enter the silent mode for about 9 minutes. If there is a fire
during this period, the smoke alarm cannot alarm. It is recommended that the user stay about 10 minutes before
leave.
When the remote control has low power alarm, please replace the battery of the same model in time.
Prevent the machine from falling from high place and violent extrusion or impact.
The communication distance of the remote controller is 50 meters (free field). Because of the room structure and
obstacles, the remote control distance will change. When using, try to keep the remote controller in the center area
of networked smoke alarms.
VI.
Common faults and Solutions
VII.
Abandon guidelines
1.
The package is made of renewable materials, please recycle as much as possible.
2.
Used batteries and electrical waste cannot be discarded together with general household garbage.
Fault phenomenon
Possible cause of failure
Processing mode
The indicator does not light up after
power on
Battery not properly installed
Install the battery correctly
Press function key is invalid
Distance out of remote control
Low electricity consumption
This feature is not valid in this state
Shorten remote control
distance
Battery replacement
Test other functions
Other
/
Please contact after-sales
service
