Level limit switch
Series VN 1000 / 2000 / 5000 / 6000
Technical information / Instruction manual
page
2. Soldering the cables
Guide the big shrink hose over all cables.
Guide the small shrink hose over each
cable.
Solder the cables as shown.
Shrink the small shrink hose with a hot air
blower. Ensure that the exposed wires are
all covered with shrink hose
3. Shrinking all cables
Push the big shrink hose over the small
shrink hosesand shrink with a hot air
blower.
4. Mounting of the extension tube to
housing side
Push the cables carefully into the
extension tube.
Screw the 1“ Extension tube into the
screwed piece. Use a 36 mm (1.42“)
open-end wrench, do not turn the
oscillating rods.
G version: Tighten the fixing screw
Sealing: see 1.2
1=green/ yellow
2=black
3=shield (M)
4=red (R-)
5=white (R+)
Small shrink hose
Fixing screw for G-version
Screwed piece
Assembly VN 5040 / 6040 with d or de-housing
Big shrinking hose
Vibranivo
®
1
2
3
4
5
6
7
8
9
10
11
12
VN 1000 / 2000 / 5000 / 6000 g
gi180713
37
