Uwatec Aladin TEC 3H User Manuals Download Page 51 | Manualshive

Page: 51 / 79

background image

51

ENGLISH

Diving with 2 or 3 gas mixtures

NOTE:

If after the decompression calculation has readjusted itself to reflect the failed switch the diver
goes again below the switch depth (MOD of gas 2 / gas d), Aladin TEC 3H will revert to the
decompression calculation that considers gas 2 / gas d also, since upon ascending again the diver
will have a renewed opportunity to perform the switch once the switch depth is reached.

Failed or interrupted switch

S

L

O

W

NO

DEPTH

DIVE TIME

MOD gas 1

Belated or manually change of gas mixture:

A diver can catch up on a required change to gas 2 / gas d until he reaches the surface.
1. Initiate the switching process by pressing

. Aladin TEC 3H displays “GAS 2” / “GAS d” , MOD

and the oxygen fraction of gas 2 / gas d blinking for 30 seconds.
By pressing

you can select “GAS 2”, “GAS d” or “GAS 1”.

2. Switch to the regulator with the selected gas mixture and start breathing.
3. Confirm the change by pressing

. “GAS 2”,“GAS d” or “GAS 1” and its oxygen fraction is

displayed for 5 seconds without blinking. The decompression calculation will readjust accordingly.

Submerging again after a change to gas 2 / gas d:

If after a change to gas 2 / gas d the Maximum Operating Depth (MOD) of gas 2 / gas d is exceeded, the
ppO

2

max warning will appear ->26.

Change back to from gas 2 to gas 1 (respectively from deco gas to gas 2), which is suited for this depth,
or rise to the Maximum Operating Depth of gas 2 / gas d. Failure to do so can result in oxygen poisoning.
1. Initiate the switching process by pressing

. Aladin TEC 3H displays “GAS 1” / “GAS 2”, MOD

and the oxygen fraction of gas 1 / gas 2 for 30 seconds.
By pressing

you can select “GAS 2”, “GAS 1” or “GAS d”.

2. Switch to the regulator with the selected gas and start breathing.
3. Confirm the change by pressing

. “GAS 1” / “GAS 2” / “GAS d” and its oxygen fraction is

displayed for 5 seconds without blinking. Afterwards the decompression calculation will readjust
accordingly.

«
...
49
50
51
52
53
...
»

Summary of Contents for Aladin TEC 3H
















































































Reviews:

No comments

Related manuals for Aladin TEC 3H

Brand: Parker Research Corp Pages: 3

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 2

Brand: Hanna Instruments Pages: 4

Brand: Hanna Instruments Pages: 2

Brand: RIDGID Pages: 18

Brand: ISKRAEMECO Pages: 12

RAVTD1760WS Series

Brand: Ravaglioli Pages: 24

Brand: LOVATO ELECTRIC Pages: 10

Brand: e-sylife Pages: 2

PASPORT PS-2174

Brand: PASCO Pages: 4

Brand: Unipro Pages: 2

Ocean Optics HR2000 Series

Brand: Halma Pages: 42

WARREN ELLIS SIGNATURE TENOR BARITONE

Brand: Eastwood Guitars Pages: 4

Brand: Fluke Pages: 32

Brand: 3M Pages: 168

Brand: Hanna Instruments Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands