Uwatec Aladin TEC 3H User Manuals Download Page 32 | Manualshive

Page: 32 / 79

background image

32

Gauge mode

4.7 Gauge Mode

WARNING

In gauge mode

ALL

audible and visual alarms and attention messages are turned off.

In gauge mode Aladin TEC 3H will display depth, dive time and tank pressure . By pressing

you

can scroll from the tank pressure to the temperature, to the average depth, to the time of day and
back to the max depth. By pressing

you can restart the stopwatch. This generates a bookmark.

Gauge mode does not support the calculation of no-stop time or the supervision of decompression.
Supervision of ppO

2

max and CNS O

2

% will also be switched off. Aladin TEC 3H will display no

information about microbubble development. The settings for the gas mixture, MOD and microbubble
level cannot be set and the dive planner cannot be selected.

Switching the gauge mode on and off

Gauge mode can be switched on and off at the surface, when there is no desaturation and no-dive in
gauge mode has been made in the last 48 hours.

WARNING

• Dives in gauge mode are performed at your own risk!
• After diving in gauge mode you must wait for at least 48 hours before using a decompression

computer.

After diving in gauge mode, Aladin TEC 3H can not be used as dive computer for 48 hours.

Procedure:

1. From the

time of day display

push

or

until the gauge

symbol and "on" or "off" are displayed.

(If Aladin TEC 3H shows “ – – – “ the gauge mode cannot be switched

“on” or “off”. Aladin TEC 3H shows “ – – – “ for 48 hours after a dive in
gauge mode and as long as there is remaining desaturation after a dive in
computer mode.)

2. Confirm with

that you wish to activate or deactivate the gauge

mode. The "on" or "off" starts flashing.

3. By pushing

or

the gauge mode is switched on or off.

4. Confirm your settings with

.

Without confirmation the display will disappear after 3 minutes and your
entries will not be accepted.

Diving in gauge mode

The following information is displayed in gauge mode:

>Tank pressure

>Temperature
>Average depth (AVG)
>Temperature , Time
>Max depth

The

average depth

is continuously updated and represents the time averaged depth since the

beginning of the dive.
You can

reset the average depth

at any time by pushing

. This generates also a bookmark.

Dive time

Gauge icon

Max depth /

Temperature /

Average depth (AVG)

Current depth

Stopwatch

DEPTH

DIVE TIME

«
...
30
31
32
33
34
...
»

Summary of Contents for Aladin TEC 3H
















































































Reviews:

No comments

Related manuals for Aladin TEC 3H

Brand: Yamaha Pages: 2

Brand: KROHNE Pages: 34

Brand: Tavool Pages: 12

Brand: Vaisala Pages: 90

Brand: Vaisala Pages: 4

CP-4900 Micro-GC

Brand: Varian Pages: 13

Brand: Stübbe Pages: 12

Brand: Kawai Pages: 72

Brand: Bühler technologies Pages: 33

Brand: red lion Pages: 4

Brand: DeFelsko Pages: 25

Brand: GW Instek Pages: 91

Brand: Kawai Pages: 24

Brand: Omega Pages: 2

Brand: Starr Instruments Pages: 29

Brand: Lasertec Pages: 24

ZET 7152-N-VER.3

Brand: ZETLab Pages: 38

Brand: Vega Absolute Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands