74
Appendix
8
APPENDIX
8.1 Technical information
Operating altitude
:
With decompression information: sea level up to approx. 4000m
(13 000ft); without decompression, above approx. 4000m (13000ft):
automatic gauge mode (unlimited)
Max displayed depth
:
120m (395ft), resolution between 0.8m and 99.9m: 0.1m, >99.9m: 1m.
The resolution in feet is always 1 foot.
Decompression calculation
depth range
:
0.8 to 120m (3 to 395ft)
Maximum environment
pressure
:
13bar (189psi)
Clock
:
Quartz clock, time, date, dive time display up to 199 minutes.
Maximum tank working
pressure
:
300bar (4350 PSI)
O
2
concentration
:
Adjustable between 21%O
2
(compressed air) and 100% O
2
.
Note that Aladin TEC 3H high pressure hose and connection are
delivered with standard materials which are useable up to 40% O2
mix. For special oxygen cleaning please contact your local official
Scubapro service.
Operating temperature
:
-10° to +50°C (14°F to 122°F)
Power supply
:
CR2450, recommended brands: PANASONIC, DURACELL,
RENATA, ENERGIZER, SONY, VARTA.
Life of the battery
:
2-3 years or 200-300 dives. Actual life of the battery depends on
the quantity of dives per year, the use of the backlight and the length
of the dives. In cold water the life of the battery is reduced. Not all
CR2450 batteries are the same, and low quality batteries can have
very short life.
8.2 Maintenance
Check Aladin TEC 3H high pressure connection and hose condition periodically and service them at
least every 2 years. Rinse Aladin TEC 3H carefully with fresh water after each use and to have the
batteries changed when needed ->76. To avoid possible problems with your Aladin TEC 3H, the
following recommendations will help assure that it will give you years of trouble free service:
