58
ALADIN SPORT USER MANUAL
The selection tabs for views are on the left
side of the main window.
6.2 Changing warnings/
settings of the Aladin
Sport and reading
computer information
By selecting Extras > Read Dive Computer
settings you can enable/disable warnings
that cannot be individually enabled or
disabled by using the menus on the actual
Aladin Sport unit.
Read sections on warnings and alarms
about the possible selections that you can
modify on your Aladin Sport.
You may also change the shown units
between metric/imperial. Select Extras >
Options > Measurement Units:
7.
TAKING CARE OF
YOUR ALADIN SPORT
7.1 Technical information
Operating altitude:
With decompression – sea level to
approximately 4000m/13300ft.
Without decompression (gauge mode) –
at any altitude.
Max operating depth:
120m/394ft; resolution is 0.1m until 99.9m
and 1m at depth deeper than 100m.
Resolution in ft is always 1ft. Accuracy is
within 2% ±0.3m/1ft.
Decompression calculation range:
0.8m to 120m/3ft to 394ft
Maximum environment pressure:
13bar/189psi
Clock:
Quartz; time, date, dive time display up
to 199 minutes
Oxygen concentration:
Adjustable between 21% and 100%.
Operating temperature:
-10C to +50C/14F to 122F
Power supply:
CR2450 lithium battery
Life of the battery:
Estimated 2 years or 300 dives,
whichever comes first. Actual battery
life depends on the number of dives
per year, the length of each dive, the
water temperature and the usage of the
backlight.
7.2 Maintenance
The depth accuracy of your Aladin Sport
should be verified every 2 years and can be
done by an authorized SCUBAPRO dealer.
Aside from that, the Aladin Sport is virtually
maintenance-free. All you need to do is
rinse it carefully with fresh water after each
dive and change the battery when needed.
To avoid possible problems with your Aladin
Sport, the following recommendations will
help ensure years of trouble-free service:
• Avoid dropping or jarring your Aladin
Sport.
