59
English
ALADIN SPORT USER MANUAL
• Do not expose your Aladin Sport to
intense, direct sunlight.
• Do not store your Aladin Sport in a
sealed container; always ensure that
there is ample ventilation.
• If there are problems with the water
contacts, use soapy water to clean your
Aladin Sport and dry it thoroughly. Do
not use silicone grease on the water
contacts!
• Do not clean your Aladin Sport with
liquids containing solvents.
• Check the battery capacity before each
dive.
• If the battery warning appears, replace
the battery.
• If any error message appears on the
display, take your Aladin Sport to an
authorized SCUBAPRO dealer.
7.2.1
Replacing the battery
(Use only the original SCUBAPRO battery
kit with O-ring.)
The change must be made with particular
care in order to prevent water from seeping
inside. The warranty does not cover
damage due to the improper replacement
of the battery.
WARNING
Never touch the metal surface of the battery
with bare fingers. The 2 battery poles must
never be short-circuited.
WARNING
• A leaking battery cap may lead to the
destruction of your Aladin Sport by water
seeping in, causing your Aladin Sport to
switch off without prior notice.
• Always open the battery compartment in a
dry and clean environment.
• Only open the battery compartment to
replace the battery.
Battery-changing procedure:
1. Dry your Aladin Sport with a soft towel.
2. Turn the battery cap with a coin or with
a SCUBAPRO universal tool.
3. Remove the battery cap.
4. Remove the O-ring carefully. Do not
damage the sealing surfaces.
5. Remove the battery. Do not touch the
contacts.
6. Always insert a new O-ring when
replacing the battery, and dispose of
the old O-ring. Make sure that the new
O-ring is in perfect condition, and that
the O-ring, the O-ring groove and the
sealing surfaces are free of dust and
dirt. If necessary, clean the parts with a
soft cloth. Fit the O-ring into the O-ring
groove of the battery cap.
WARNING
If you notice traces of seeping water, damage,
or other defects on the O-ring, do not use your
Aladin Sport for further dives. Take it to an
authorized SCUBAPRO dealer for inspection
and repair.
WARNING
7. Use only an original SCUBAPRO O-ring.
This O-ring is Teflon-coated and does not
require additional lubrication.
8. Do not lubricate the O-ring as the lubricant
will chemically attack the battery cap.
