9
English
ALADIN SPORT USER MANUAL
2.2.3
Switching on the display
All segments on:
Start up display with time:
F
NOTE: On the lower matrix row on the
display, longer words are scrolled. In
this manual, such scrolling is indicated
by left-pointing arrows running along
the bottom of the display
.
Time of day display:
The Aladin Sport switches on:
• Automatically, upon submerging in
water or when triggered by a change in
atmospheric pressure.
• Manually, by pushing and holding either
the left or right button.
If switched on with the left button, all
display segments appear for 5 seconds.
Afterwards, the display shows the time of
day, the date and a scrolling SCUBAPRO
which is quickly replaced by the day of the
week. This is referred to as the “time of
day” display.
In the time of day display, if there is
remaining saturation from the last dive or
from a change of altitude, the Aladin Sport
may indicate the “Do not fly” icon, “Do not
dive” icon or “Altitude” icon or a combination
of the icons depending on the situation.
F
NOTE: Most navigation descriptions
in this manual start from the time of
day display. At the surface, the Aladin
Sport returns automatically to this
display
.
F
NOTE: When the Aladin Sport is in a
state of rest, no information is displayed
but the atmospheric pressure
continues to be monitored. If a change
in altitude classes is detected, the
Aladin Sport automatically switches
on for 3 minutes
.
F
NOTE: Without active use the Aladin
Sport’s display automatically reverts
to the time of day display, and after 3
minutes the computer switches off
.
2.2.4
How to navigate the Aladin
Sport at the surface
Starting from the time of day display you
can enter into different menus.
2.2.5
Checking the desaturation
time
From the time of day display you can check
the desaturation time* with a press-and-
hold of the right button. Desaturation time
is determined either by oxygen toxicity,
nitrogen saturation or the regression
