Manufacturer: UVI Group Corporation GSM Car Alarm System with GPS Car Tracking (GPS-118V)
-4/18-
1.4.5
R
emote Control
Working Voltage: 12V (1 A27 12V dry battery)
Working Frequency: 300MHz-500HMz
Control Distance: 20-100M
Static Current: 0mA
1.4.6 Working Conditions
Mainframe
Storage Temp.: -30
℃
-85
℃
Working Temp.: -20
℃
-65
℃
Working Humidity: 25% — 95%
Accessory
Storage Temp.: -40
℃
-100
℃
Working Temp.: -20
℃
-85
℃
Working Humidity: 25% — 95%
1.4.7 Size of the Mainframe
123 MM *116 MM *38 MM
2. Original Settings
This first thing after installation is to set alarm phone numbers, emergency number and
password. The user must set at least one alarm phone number to ensure the normal function of
this system.
2.1 Insert a SIM Car, install GSM and GPS antenna
Before using this system, please buy a SIM card of GSM. Insert the card into the back of
mainframe. Please remember the card number. Quick flashing of the signal LED indicates there is
no GSM signal, while slow flash tells that the GSM signal is in good.
Install the GSM antenna above the SIM card socket, and GPS antenna install beside it.
2.2 Set and Modify the Password
Please change the original password of this system in order to prevent any wrong telephone
call and illegal operation.
Solution 1
Press button *+# on the dialer to enter into the operation menu.
Solution 2
Use any phone to dial the SIM card number to enter into the
Main Menu of Operation,
then to”
Modify Password
” to set new password.
2.3 Alarm Phone Number
When there is an alarm trigger, this system will call the alarm phone numbers. Normally, one
alarm phone number is enough for the normal alarm function. If needed, 2 or more phone
numbers can be set into this system. In case of any alarm, this system will call these numbers by
turns, which will never stop until one of these calls is answered. The 1
st
one is prior. At the same
time, system sends short message to these numbers. If the 1
st
phone is answered, there will be no
short message to the 2
nd
phone number.
2.4.
Set Emergency Help Number
When the car is hijacked, the owner can get help from 2 ways. He can use the remote control
to activate anti-hijacking mode. Please find the instruction in 3.14. Secondly, he can press the
emergency help switch to activate anti-hijacking mode.
When the car enters into anti-hijacking status, the mainframe of this system will dial the
emergency help number to get help. Once the call is answered, the LED will flash 3 times in 5
seconds. As the driver may be restrained to take any action in this situation, owner had better set
his intimate’s or family telephone into this emergency help number.
2.5. Delete an Alarm Telephone Number
