Manufacturer: UVI Group Corporation GSM Car Alarm System with GPS Car Tracking (GPS-118V)
-12/18-
To cancel the function, please send message (password*T0#)
If have not set password yet, directly send *Tx#(x=0
~
9), spacing interval is multiple of 4.
If send password wrong, the GPS system will send back a message: Wrong password.
If send format wrong, the GPS system will send back a message: Failed, correct format is
password*Tx#(x=0
~
9)
4. Dialer
4.1 Buttons of the Dialer
0-9.*.# Phone button
YES Answer phone call, call out
C Delete the last number
NO Hang up, exit the system directly (optional)
4.1.1 Pressing 0-9, the user can hear the number he dialed, with toot by other buttons.
4.1.2 How to Use the Dialer
Phone numbers can be set by dialer. Press No, and then *password# to enter into the system. If
there is no password, press *# to enter.
4.1.3 Dial a Phone number
Press button NO on the dial-pad firstly, and then enter the phone number. You can delete the
last number you enter by pressing C. Finishing all the numbers, press YES. The system will repeat
what you have entered, “The phone number you entered is ***.” 3 seconds later, the number will
be connected. In the course of dialing and talking, press NO to hang up.
4.1.4 Answer a Phone
When there is an incoming call, the system rings. Press NO to hang up and YES to answer.
5. Phone Operation
When the user answers a call from the mainframe, he can press the corresponding numbers to
control the system.
5.1 Note
5.1.1 When the user connected the car from his side, he should choose Car Control and enter
password to enter into the system. If there is no password, he can enter into the system directly.
5.1.2 When the user answered an alarm phone call, there is no need to enter password to enter
into the system.
5.1.3 If the user enters a invalid button, the system will repeat the options again.
5.1.4 In submenu, press 0 to return the upper menu. In the main operation menu, press 0 to exit.
5.1.5 When the line is get through and no order is from user’s side, there will be short beep after
40 seconds, with another beeps in every 10 seconds after. At last, the system will be cut off
automatically after 1 minute. Press # to delay the talking time.
5.2 Telephone Operation Menu
5.2.1 Telephone Operation (in disarmed mode)
Dial the number of mainframe, and enter the password according to voice instruction.
Dial the number of mainframe
Welcome to use GSM car alarm system.
Correct password please enter password, please “Hex” when finished.
Correct password
Wrong password, please try again.
