Chapter 2. Specification
3
2. SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
Table 2.1
ITEM
Name
State introduction
Power
A steady green light means the power connection
works properly.
Status
Blinking green indicates normal operation. A system
failure is indicated by either green or an unlit LED.
xDSL
Link/Act
Solid green indicates a good ADSL link. Blinking
green indicates an active connection.
Ethernet
Link/Act
Solid green indicates a good Ethernet link. Blinking
green indicates an active connection.
Indicator
USB
Link/Act
Solid green indicates a good USB link. Blinking
green indicates an active connection.
Line
Connected with phone line or “ADSL” port of the
splitter.
Ethernet
To be connected to a PC network card by a straight-
through network cable, also can use a crossover
cable to connect to Hub, Switch or Router.
USB
To connect to a USB device through a Type B
connector.
Power
Power interface, Connect with power adapter.
Reset
Button
Reset to default setting.
Press the button for 5 seconds. Then you can reset
the Router with the default value.
Interface
Power
Button
To turn the power off and on.
