Chapter 4 Other Configuration
34
The
ATM Interface
pull-down menu offers eight virtual connections available for configuration. The default PVC
used by the Router is labeled
PVC-0
. Any additional connections that are configured must have a VPI/VCI combination
that is unique to the Router. These numbers will have been already been established by your service provider on their
network.
To add a new virtual connection:
1. Select the new PVC to configure from the
ATM Interface
pull-down menu.
2. Enter the values for the
VPI
and
VCI
given to you by your service provider.
3. To activate the VC, select
Enabled
from the
Virtual Circuit
pull-down menu.
4. Configure the remaining
Interface Setup
settings
for the type of
Encapsulation
as desired.
To save the new settings, click the
Apply
button. The new connection will activate upon restarting.
4.4 UPNP CONFIGURATION
Universal Plug and Play supports zero-configuration networking and automatic discovery for many types of
networked devices. When enabled, it allows other devices that support UPnP to dynamically join a network, obtain an IP
address, convey its capabilities, and learn about the presence and capabilities of other devices. DHCP and DNS service
can also be used if available on the network. UPnP also allows supported devices to leave a network automatically
without adverse effects to the device or other devices on the network.
UPnP can be supported by diverse networking media including Ethernet, Firewire, phone line, and power line
networking.
UPnP Configuration window
To enable UPnP for any available connection, select
Enabled
from the drop-down menu under
Next Boot
Status:
and click the
Apply
button.
